Our Services
- Oil Pressure Switch
- Temperature Sensor
- Charge Air Combination Sensor
- Rotational Speed Sensor
- Oil Pump
- Timing Rotary Shaft Seal
- Oil Cooler
- Engine Mount LH
- Engine Mount RH
- Camshaft Bush Set Of 7
- LU Oil Spray Nozzle
- Shaft Lip Type Seal / Crankshaft RR
- Oil Dipstick Tube / Guide Tube Assembly
- Oil Sump
- Sealing Washer For Head Cover
- Filler Cap
- Gasket / Rocker Cover
- Cylinder-Head Bolt 14X2.0X123
- Cylinder-Head Bolt 16X2.0X150
- Valve Guide Exhaust Set Of 18
- Valve Seat Ring Exhaust / Intake Set Of 18
- Intake/Exhaust Valve Set Of 18
- Valve Stem Seal Set Of 18
- Cylinder Head Gasket
- Constant Throttle Line Zigzag Line
- Connecting Rod Bearing STD Set Of 6
- Main Bearing STD
- Thrust Washer / STD
- Connecting Rod
- Connecting Rod Bush Set Of 6
- Piston / BA/BS3
- Piston Ring Set Of 6
- Cylinder Liner
- Push Rod
- Valve Tappet
- Pressure Pipe Connection Pencil
- Pressure Line
- Unit Pump PLN
- Fuel Feed Pump
Push Rod
The Push Rod transfers motion from the camshaft to the rocker arms for proper valve opening.
Built from high-strength steel, the push rod is engineered to withstand continuous impact, high pressure, and rapid reciprocating movement during engine operation. Its precision straightness and hardened ends ensure minimal wear, accurate lift, and consistent valve timing. The rod’s rigid design prevents bending or flexing, allowing smooth power transmission under heavy engine loads.
By maintaining stable valve actuation, the push rod ensures efficient combustion, proper airflow, and reliable engine performance. It plays a key role in reducing mechanical noise, enhancing durability, and supporting long-term operation in heavy-duty commercial diesel engines.
Key Features
- High-strength steel push rod
- Hardened ends for reduced wear
- Ensures accurate valve timing and lift
- Resistant to bending and heavy loads
- Ideal for commercial diesel engines
Product Specifications
| GROUP | MODEL | REF. PART NUMBER | SPECIFICATIONS |
|---|---|---|---|
| 19.048 | 3128, 2523, 2528 | A9060501212 | Push Rod – High-Strength Steel |
Process Steps
- Remove rocker assembly and old push rods
- Inspect camshaft lobes and rocker arms
- Install new push rod with correct orientation
- Reassemble rocker mechanism
- Adjust valve clearance if required
- Verify smooth valve operation
FAQ
What does a push rod do?
It transmits camshaft motion to the rocker arms, enabling valve opening and closing.
When should a push rod be replaced?
When bent, worn, noisy, or during major valve train servicing.
