Our Services
- Stabilizer Shackle With Bush
- Rubber Bearing BS3
- Rubber Bearing Etal Bushings, Cylindrical
- Spacer Tube / Inner
- Rubber Bush / Clamping
- Rear Torsion Bar BS4/6
- Stabilizer Shackle With Bush
- ELASTOMER BEARING
- Bearing Bush / Assy DIA 45
- Bracket / ARB Bushing
- Rear Bearing Bush Stabilizer Cap
- Hex Screw MBN 10105-M14X1.5X 60-10.9
- LU Elastomer Bearing
- LU Elastomer Bearing 70MM
- Stabilizer Shackle / 500MM Short With Bush
- Stabilizer Shackle/540MM Long With Bush
- Bearing Bracket Stabilizer
- Hex Screw MBN 10105-M16X1.5X 60-10.9
- Torsion Bar
- Stabilizer Base LH
- Stabilizer Base RH
- Front Bearing Bush Stabilizer Cap
- Additional Spring Buffer
- Bolt, Special Shape / SPL Bolt Front
- Rubber Bearing Shackle Bush
- Shackle Plate
- Shackle Plate With Thread
- Hexagon Screw - M24X2X180 - 10.9
- Hexagon Screw - M24X2X130 - 10.9
- Hexagon Nut - M24X2-10 DBL944
- Front Spring Bracket FRT RH
- Hex Screw MBN 10105-M16X1.5X 45-10.9
- Hex Screw MBN 10105-M16X1.5X 80-10.9
- Nut N 13023-M 16X1.5-10 DBL9440
- Tow Bar Link Joint Assembly
- Tow Bar End Ball Joint LH
- Tow Bar End Ball Joint RH
- Swivelling Lever RR LH
- Swivelling Lever RR RH
- Swivelling Lever FRT LH
- Swivelling Lever FRT RH
- Elastomer Buffer With Bolt
- Bearing Bushs
- Bearing Bush
- Bearings Bush
- Equalizer Hangar
- Equalizer Hangar Pin 4 Holes
- Equalizer Pad
- Equalizer Bush Brass
- Spring Pin 30×158
- Spring Pin Bush Brass
- Spring Pin Bush for Lifter Spring Leaf
- Equalizer Assembly With Brass Bush OEM
- Hexagon Screw M24X2X220
- Hexagon Screw M24X2X200
- Hexagon Screw M24X2X150
- Lifter Leaf Spring Bush
- Hollow-Bolster Rubber Buffer
Equalizer Bush Brass
Manufactured from high-grade brass alloy, this bush provides excellent wear resistance, low friction, and high load-bearing capability. It ensures smooth rotation of the equalizer pin while maintaining precise alignment under heavy loads and continuous suspension movement. The brass construction offers superior resistance to corrosion, heat, and deformation, making it ideal for demanding operating conditions. By reducing metal-to-metal contact and minimizing wear on pins and hangers, the bush improves suspension durability, load balance between axles, and overall ride stability.
Key Features
- High-quality brass bush for equalizer suspension assemblies
- Provides smooth pivoting and reduces friction
- Excellent wear resistance under heavy loads
- Corrosion-resistant and long-lasting material
- Maintains axle alignment and suspension stability
Product Specifications
| GROUP | MODEL | REF. PART NUMBER | SPECIFICATIONS |
|---|---|---|---|
| 12.056 | 3723, 3123, 2823, 4223 | Equalizer Bush – Brass – Suspension Pivot Component |
Process Steps
- Raise and securely support the vehicle suspension.
- Remove the equalizer pin or beam as required.
- Extract the worn brass bush from the equalizer housing.
- Clean the bore and inspect for damage or scoring.
- Press-fit the new brass equalizer bush into position.
- Reassemble components and test for smooth pivot movement.
FAQ
Why is brass used for the equalizer bush?
Brass offers low friction, high wear resistance, and excellent durability under heavy load conditions.
When should the equalizer bush be replaced?
Replace when excessive play, noise, scoring, or uneven axle movement is observed.
