Our Services
- Stabilizer Shackle With Bush
- Rubber Bearing BS3
- Rubber Bearing Etal Bushings, Cylindrical
- Spacer Tube / Inner
- Rubber Bush / Clamping
- Rear Torsion Bar BS4/6
- Stabilizer Shackle With Bush
- ELASTOMER BEARING
- Bearing Bush / Assy DIA 45
- Bracket / ARB Bushing
- Rear Bearing Bush Stabilizer Cap
- Hex Screw MBN 10105-M14X1.5X 60-10.9
- LU Elastomer Bearing
- LU Elastomer Bearing 70MM
- Stabilizer Shackle / 500MM Short With Bush
- Stabilizer Shackle/540MM Long With Bush
- Bearing Bracket Stabilizer
- Hex Screw MBN 10105-M16X1.5X 60-10.9
- Torsion Bar
- Stabilizer Base LH
- Stabilizer Base RH
- Front Bearing Bush Stabilizer Cap
- Additional Spring Buffer
- Bolt, Special Shape / SPL Bolt Front
- Rubber Bearing Shackle Bush
- Shackle Plate
- Shackle Plate With Thread
- Hexagon Screw - M24X2X180 - 10.9
- Hexagon Screw - M24X2X130 - 10.9
- Hexagon Nut - M24X2-10 DBL944
- Front Spring Bracket FRT RH
- Hex Screw MBN 10105-M16X1.5X 45-10.9
- Hex Screw MBN 10105-M16X1.5X 80-10.9
- Nut N 13023-M 16X1.5-10 DBL9440
- Tow Bar Link Joint Assembly
- Tow Bar End Ball Joint LH
- Tow Bar End Ball Joint RH
- Swivelling Lever RR LH
- Swivelling Lever RR RH
- Swivelling Lever FRT LH
- Swivelling Lever FRT RH
- Elastomer Buffer With Bolt
- Bearing Bushs
- Bearing Bush
- Bearings Bush
- Equalizer Hangar
- Equalizer Hangar Pin 4 Holes
- Equalizer Pad
- Equalizer Bush Brass
- Spring Pin 30×158
- Spring Pin Bush Brass
- Spring Pin Bush for Lifter Spring Leaf
- Equalizer Assembly With Brass Bush OEM
- Hexagon Screw M24X2X220
- Hexagon Screw M24X2X200
- Hexagon Screw M24X2X150
- Lifter Leaf Spring Bush
- Hollow-Bolster Rubber Buffer
Hexagon Screw - M24X2X180 - 10.9
The Hexagon Screw – M24×2×180 – 10.9 is a heavy-duty high-tensile fastener designed for critical load-bearing applications in commercial vehicles. With its large M24 diameter, 2.0 pitch, and 180 mm length, it provides exceptional clamping strength and secure assembly for suspension, chassis, and structural components.
Manufactured from grade 10.9 alloy steel, the screw offers superior tensile and shear resistance, ensuring durability under continuous vibration, high torque, and dynamic operating conditions. The hex head allows easy installation with precision torque control, delivering long-term fastening reliability.
Key Features
- Heavy-duty M24×2×180 mm hex screw
- Grade 10.9 alloy steel for high tensile and shear strength
- Precision threads ensure proper fit and secure fastening
- Corrosion-resistant finish enhances service life
- Suitable for suspension, chassis, and structural applications
Product Specifications
| GROUP | MODEL | REF. PART NUMBER | SPECIFICATIONS |
|---|---|---|---|
| 12.033 | 3128, 2523, 2528 | N000000005464 | Hex Screw – M24 × 2 × 180 – Grade 10.9 – Heavy-Duty Fastener |
Process Steps
- Clean the mounting surface and check thread engagement points.
- Insert the M24×2×180 screw into the designated assembly location.
- Apply OEM-recommended torque using a calibrated torque wrench.
- Ensure correct seating and alignment of the fastened components.
- Recheck torque after initial operation if specified by OEM guidelines.
FAQ
Why use a grade 10.9 hex screw?
Grade 10.9 provides the high strength required for heavy-duty and safety-critical applications.
Where is this screw typically used?
In suspension mounts, axle brackets, torque rod assemblies, and structural joints.
