Our Services
- Stabilizer Shackle With Bush
- Rubber Bearing BS3
- Rubber Bearing Etal Bushings, Cylindrical
- Spacer Tube / Inner
- Rubber Bush / Clamping
- Rear Torsion Bar BS4/6
- Stabilizer Shackle With Bush
- ELASTOMER BEARING
- Bearing Bush / Assy DIA 45
- Bracket / ARB Bushing
- Rear Bearing Bush Stabilizer Cap
- Hex Screw MBN 10105-M14X1.5X 60-10.9
- LU Elastomer Bearing
- LU Elastomer Bearing 70MM
- Stabilizer Shackle / 500MM Short With Bush
- Stabilizer Shackle/540MM Long With Bush
- Bearing Bracket Stabilizer
- Hex Screw MBN 10105-M16X1.5X 60-10.9
- Torsion Bar
- Stabilizer Base LH
- Stabilizer Base RH
- Front Bearing Bush Stabilizer Cap
- Additional Spring Buffer
- Bolt, Special Shape / SPL Bolt Front
- Rubber Bearing Shackle Bush
- Shackle Plate
- Shackle Plate With Thread
- Hexagon Screw - M24X2X180 - 10.9
- Hexagon Screw - M24X2X130 - 10.9
- Hexagon Nut - M24X2-10 DBL944
- Front Spring Bracket FRT RH
- Hex Screw MBN 10105-M16X1.5X 45-10.9
- Hex Screw MBN 10105-M16X1.5X 80-10.9
- Nut N 13023-M 16X1.5-10 DBL9440
- Tow Bar Link Joint Assembly
- Tow Bar End Ball Joint LH
- Tow Bar End Ball Joint RH
- Swivelling Lever RR LH
- Swivelling Lever RR RH
- Swivelling Lever FRT LH
- Swivelling Lever FRT RH
- Elastomer Buffer With Bolt
- Bearing Bushs
- Bearing Bush
- Bearings Bush
- Equalizer Hangar
- Equalizer Hangar Pin 4 Holes
- Equalizer Pad
- Equalizer Bush Brass
- Spring Pin 30×158
- Spring Pin Bush Brass
- Spring Pin Bush for Lifter Spring Leaf
- Equalizer Assembly With Brass Bush OEM
- Hexagon Screw M24X2X220
- Hexagon Screw M24X2X200
- Hexagon Screw M24X2X150
- Lifter Leaf Spring Bush
- Hollow-Bolster Rubber Buffer
Equalizer Hangar Pin 4 Holes
Manufactured from high-strength hardened steel, this pin provides a strong and reliable pivot point that allows smooth rotation of the equalizer beam while maintaining precise alignment between axles. The 4-hole design enables secure locking using bolts or retaining fasteners, preventing axial movement during heavy load operation. Engineered to withstand high shear forces, continuous vibration, and harsh road conditions, the pin ensures balanced load distribution across axles and reduces stress on springs, bushes, and hangers. Its precision-machined surface minimizes wear, extending the service life of the suspension system in demanding commercial vehicle applications.
Key Features
- Heavy-duty equalizer hangar pin with 4-hole locking design
- Provides smooth pivoting of the equalizer beam
- High-strength hardened steel construction
- Resists shear loads, vibration, and wear
- Ensures stable axle load distribution and suspension alignment
Product Specifications
| GROUP | MODEL | REF. PART NUMBER | SPECIFICATIONS |
|---|---|---|---|
| 12.054 | 3723, 3123, 2823, 4223 | Equalizer Hangar Pin – 4 Holes – Suspension Pivot Component |
Process Steps
- Raise and securely support the vehicle suspension.
- Remove locking bolts or retainers from the old hangar pin.
- Slide out the worn pin from the equalizer hangar.
- Align the equalizer beam and insert the new 4-hole pin.
- Secure the pin using locking bolts as per OEM specifications.
- Test equalizer movement to ensure smooth articulation.
FAQ
What is the purpose of the 4-hole design?
The holes allow secure locking with bolts, preventing pin movement under heavy load.
When should the equalizer hangar pin be replaced?
Replace when wear marks, bending, looseness, or noise from the equalizer assembly is observed.
