Our Services
- Thrust Washer
- Clamp Nut Axle
- Cap Bolt ISO 4762-M10X 40-10.9 DBL9
- Hub Cap
- Steering Knuckle Kit Single Cut
- Steering Knuckle Kit Double Cut
- Profile Seal Packing Front
- Nutring ABS Ring
- Radial Shaft Sealing Ring ABS
- Tapered Roller Bearing / 125X70X41 (33214 Front Inner)
- Tapered Roller Bearing / 90X50X32 (33210 Front Outer)
- Wheel Mounting Bolt / HDT / M22 X 2.5 X 78
- Wheel Nut M22 X 2.5
- Front Wheel Hub ABS
- Front Wheel Hub NonABS
- Drag Link Assembly
- Tie Rod Assembly
- Tie Rod Assembly
- Radial Shaft Sealing Ring NonABS
- Rear Axle Shaft Short With Diff. Lock
- Wheel Mounting Bolt / HDT / M22 X 2.5 X 98
- Tapered Roller Bearing / 130X80X37 (33116 Rear Outer)
- Tapered Roller Bearing / 150X100X31 (33020 Rear Inner)
- Profile Seal Packing Rear
- Radial Shaft Sealing Ring BS4/6
- Radial Shaft Sealing Ring BS3
- Axle Locknut - M80X1.5
- Axle Locknut - M80X1.5 OS
- Lock Plate for Grooved Nut
- Distanzplatte Washer
- Impulsring Spacer
- Radial Seal Input Thru Shaft
- Input Thru Shaft Nut M39X1.5 (Yoke)
- Brake Drum / 180MM 7"
- Brake Drum / 220MM/FG300 9"
- Brake Drum / Oil Hub
- Brake Shoe 14 Holes
- Brake Shoe 12 Holes
- Brake Lining / Set-(STD) Cons - 410X220 12 Hole
- Brake Lining / Set-(STD) Construction 14 Hole
- Retaining Spring / Abutment End Small
- Tension Spring / Spring Cam End Big
- Brake Cam Oil Seal
- Brake Cam Bush Brass
- Brake Adjustment / Automatic-160MM-75 Offset / LH
- Brake Adjustment / Automatic-160MM-75 Offset / RH
- Brake Adjustment / Automatic-160MM
- Brake Cylinder LH / Type 24/24/200MM/ RT1
- Brake Cylinder RH / Type 24/24/200MM/ RT1
- Brake Cylinder LH / Type 20/24/72MM/IN/ RT2
- Brake Cylinder RH / Type 20/24/72MM/IN/ RT2
- Four-Circuit Protection Valve / EG FU
- Quick Exhaust Valve – QRV (WABCO)
- Air Drier – KNORR
- AIR DRIER / WABCO
- Relay Valve - Delivery Plug-WABCO
- Solenoid Valve VOSS Type
- Pressure Sensor / KB
- Drain Valve / Water Drain Plug
- Air Pressure Limiter / Valve Unit Euro4
- Dual-Circuit Brake Valve
- Compressed Air Line Brake / Rubber Hose / FRT
- Cylinder Head / Air Compressor Cyl Assy HD
- Cylinder Head
- Coolant Line
- Coolant Line
- Brake Shoe Liner Set
Brake Lining / Set-(STD) Cons - 410X220 12 Hole
Engineered with high-quality composite friction material, the lining set ensures stable braking performance, reduced fade, and excellent heat resistance. Its 410 × 220 mm size and 12-hole configuration provide perfect compatibility with matching brake shoes, enabling uniform contact with the drum. The consistent friction surface enhances smooth deceleration and reliable braking efficiency under varied load conditions.
By providing consistent braking force and extended wear life, this lining set reduces maintenance downtime and enhances operational safety for heavy-duty vehicles.
Key Features
- Standard-duty 410 × 220 mm brake lining set
- 12-hole configuration for precise fitment on matching brake shoes
- High-performance friction material with excellent heat resistance
- Smooth, consistent braking and reduced fade
- Long service life for heavy commercial operations
Product Specifications
| GROUP | MODEL | REF. PART NUMBER | SPECIFICATIONS |
|---|---|---|---|
| 11.046 | 3128, 2523, 2528 | A4004210731 | Brake Lining Set – STD – 410 × 220 – 12 Hole |
Process Steps
- Remove wheel and brake drum to access the brake shoes.
- Detach old brake linings and clean the brake shoes thoroughly.
- Rivet or bond the new 12-hole linings onto the shoes as required.
- Inspect springs, pins, and adjusters for wear and replace if needed.
- Reassemble brake components and adjust shoe clearance to OEM specs.
- Reinstall the drum and test braking for smooth and consistent operation.
FAQ
What does “STD Cons” mean?
It indicates standard-duty (STD) consumable brake linings designed for regular commercial operation.
When should brake linings be replaced?
Replace when the friction layer wears thin, braking weakens, or noise and vibration occur.
