Our Services
- Thrust Washer
- Clamp Nut Axle
- Cap Bolt ISO 4762-M10X 40-10.9 DBL9
- Hub Cap
- Steering Knuckle Kit Single Cut
- Steering Knuckle Kit Double Cut
- Profile Seal Packing Front
- Nutring ABS Ring
- Radial Shaft Sealing Ring ABS
- Tapered Roller Bearing / 125X70X41 (33214 Front Inner)
- Tapered Roller Bearing / 90X50X32 (33210 Front Outer)
- Wheel Mounting Bolt / HDT / M22 X 2.5 X 78
- Wheel Nut M22 X 2.5
- Front Wheel Hub ABS
- Front Wheel Hub NonABS
- Drag Link Assembly
- Tie Rod Assembly
- Tie Rod Assembly
- Radial Shaft Sealing Ring NonABS
- Rear Axle Shaft Short With Diff. Lock
- Wheel Mounting Bolt / HDT / M22 X 2.5 X 98
- Tapered Roller Bearing / 130X80X37 (33116 Rear Outer)
- Tapered Roller Bearing / 150X100X31 (33020 Rear Inner)
- Profile Seal Packing Rear
- Radial Shaft Sealing Ring BS4/6
- Radial Shaft Sealing Ring BS3
- Axle Locknut - M80X1.5
- Axle Locknut - M80X1.5 OS
- Lock Plate for Grooved Nut
- Distanzplatte Washer
- Impulsring Spacer
- Radial Seal Input Thru Shaft
- Input Thru Shaft Nut M39X1.5 (Yoke)
- Brake Drum / 180MM 7"
- Brake Drum / 220MM/FG300 9"
- Brake Drum / Oil Hub
- Brake Shoe 14 Holes
- Brake Shoe 12 Holes
- Brake Lining / Set-(STD) Cons - 410X220 12 Hole
- Brake Lining / Set-(STD) Construction 14 Hole
- Retaining Spring / Abutment End Small
- Tension Spring / Spring Cam End Big
- Brake Cam Oil Seal
- Brake Cam Bush Brass
- Brake Adjustment / Automatic-160MM-75 Offset / LH
- Brake Adjustment / Automatic-160MM-75 Offset / RH
- Brake Adjustment / Automatic-160MM
- Brake Cylinder LH / Type 24/24/200MM/ RT1
- Brake Cylinder RH / Type 24/24/200MM/ RT1
- Brake Cylinder LH / Type 20/24/72MM/IN/ RT2
- Brake Cylinder RH / Type 20/24/72MM/IN/ RT2
- Four-Circuit Protection Valve / EG FU
- Quick Exhaust Valve – QRV (WABCO)
- Air Drier – KNORR
- AIR DRIER / WABCO
- Relay Valve - Delivery Plug-WABCO
- Solenoid Valve VOSS Type
- Pressure Sensor / KB
- Drain Valve / Water Drain Plug
- Air Pressure Limiter / Valve Unit Euro4
- Dual-Circuit Brake Valve
- Compressed Air Line Brake / Rubber Hose / FRT
- Cylinder Head / Air Compressor Cyl Assy HD
- Cylinder Head
- Coolant Line
- Coolant Line
- Brake Shoe Liner Set
Cylinder Head
Engineered from high-strength alloy material, it withstands extreme heat and pressure generated during combustion. Its precision-machined passages ensure optimal air–fuel mixing, improved combustion efficiency, and reduced emissions. The head also provides structural support for injectors, valve trains, and cooling channels, ensuring balanced temperature distribution and long-term durability.
By maintaining proper sealing and efficient thermal stability, the cylinder head enhances engine performance, improves fuel efficiency, and ensures reliable power delivery under demanding operating conditions.
Key Features
- Heavy-duty cylinder head for commercial diesel engines
- High-strength alloy construction for heat and pressure resistance
- Precision-machined valve seats, ports, and combustion chamber
- Supports injectors, valve trains, and cooling passages
- Ensures efficient combustion and long engine life
Product Specifications
| GROUP | MODEL | REF. PART NUMBER | SPECIFICATIONS |
|---|---|---|---|
| 11.080 | 3128, 2523, 2528 | Cylinder Head – Heavy-duty diesel engine application |
Process Steps
- Drain coolant and remove intake, exhaust, and fuel connections.
- Remove the valve cover, camshaft, and head bolts in sequence.
- Lift off the old cylinder head and clean the block surface thoroughly.
- Position the new cylinder head with a fresh gasket.
- Torque bolts in sequence as per OEM specifications.
- Reassemble all engine components and check for leaks and proper operation.
FAQ
What does the cylinder head do?
It seals the combustion chamber, houses valves and injectors, and controls airflow for efficient combustion.
When should the cylinder head be replaced?
Replace when cracked, warped, leaking coolant, or when compression loss is detected.
