Our Services
- Thrust Washer
- Clamp Nut Axle
- Cap Bolt ISO 4762-M10X 40-10.9 DBL9
- Hub Cap
- Steering Knuckle Kit Single Cut
- Steering Knuckle Kit Double Cut
- Profile Seal Packing Front
- Nutring ABS Ring
- Radial Shaft Sealing Ring ABS
- Tapered Roller Bearing / 125X70X41 (33214 Front Inner)
- Tapered Roller Bearing / 90X50X32 (33210 Front Outer)
- Wheel Mounting Bolt / HDT / M22 X 2.5 X 78
- Wheel Nut M22 X 2.5
- Front Wheel Hub ABS
- Front Wheel Hub NonABS
- Drag Link Assembly
- Tie Rod Assembly
- Tie Rod Assembly
- Radial Shaft Sealing Ring NonABS
- Rear Axle Shaft Short With Diff. Lock
- Wheel Mounting Bolt / HDT / M22 X 2.5 X 98
- Tapered Roller Bearing / 130X80X37 (33116 Rear Outer)
- Tapered Roller Bearing / 150X100X31 (33020 Rear Inner)
- Profile Seal Packing Rear
- Radial Shaft Sealing Ring BS4/6
- Radial Shaft Sealing Ring BS3
- Axle Locknut - M80X1.5
- Axle Locknut - M80X1.5 OS
- Lock Plate for Grooved Nut
- Distanzplatte Washer
- Impulsring Spacer
- Radial Seal Input Thru Shaft
- Input Thru Shaft Nut M39X1.5 (Yoke)
- Brake Drum / 180MM 7"
- Brake Drum / 220MM/FG300 9"
- Brake Drum / Oil Hub
- Brake Shoe 14 Holes
- Brake Shoe 12 Holes
- Brake Lining / Set-(STD) Cons - 410X220 12 Hole
- Brake Lining / Set-(STD) Construction 14 Hole
- Retaining Spring / Abutment End Small
- Tension Spring / Spring Cam End Big
- Brake Cam Oil Seal
- Brake Cam Bush Brass
- Brake Adjustment / Automatic-160MM-75 Offset / LH
- Brake Adjustment / Automatic-160MM-75 Offset / RH
- Brake Adjustment / Automatic-160MM
- Brake Cylinder LH / Type 24/24/200MM/ RT1
- Brake Cylinder RH / Type 24/24/200MM/ RT1
- Brake Cylinder LH / Type 20/24/72MM/IN/ RT2
- Brake Cylinder RH / Type 20/24/72MM/IN/ RT2
- Four-Circuit Protection Valve / EG FU
- Quick Exhaust Valve – QRV (WABCO)
- Air Drier – KNORR
- AIR DRIER / WABCO
- Relay Valve - Delivery Plug-WABCO
- Solenoid Valve VOSS Type
- Pressure Sensor / KB
- Drain Valve / Water Drain Plug
- Air Pressure Limiter / Valve Unit Euro4
- Dual-Circuit Brake Valve
- Compressed Air Line Brake / Rubber Hose / FRT
- Cylinder Head / Air Compressor Cyl Assy HD
- Cylinder Head
- Coolant Line
- Coolant Line
- Brake Shoe Liner Set
Wheel Mounting Bolt / HDT / M22 X 2.5 X 98
Its M22 × 2.5 fine-thread profile delivers high clamping force, excellent vibration resistance, and reliable torque retention. At 98 mm in length, the bolt offers deep engagement for improved wheel stability and reduced risk of loosening. Manufactured from high-strength alloy steel, it withstands extreme vehicle loads, frequent torque cycles, and harsh road conditions, ensuring long-term durability and safety.
By maintaining a firm connection between the wheel and hub, this mounting bolt enhances vehicle stability, reduces wheel wobble, and prevents dangerous wheel separation. Its precision machining ensures accurate fitment and consistent performance even during heavy-duty, long-haul operations.
Key Features
- Heavy-duty wheel mounting bolt for commercial trucks
- M22 × 2.5 thread provides superior clamping strength
- 98 mm length ensures deep and secure engagement
- High-strength alloy steel construction for durability
- Maintains wheel stability and prevents loosening
Product Specifications
| GROUP | MODEL | REF. PART NUMBER | SPECIFICATIONS |
|---|---|---|---|
| 11.027 | 3128, 2523, 2528 | A4004012071 | Wheel Mounting Bolt – M22 × 2.5 × 98 – HDT |
Process Steps
- Clean wheel hub and stud surfaces thoroughly.
- Hand-thread the mounting bolt to ensure correct alignment.
- Tighten bolts in a crisscross/star pattern to avoid uneven pressure.
- Apply OEM-recommended torque using a calibrated torque wrench.
- Recheck torque after short vehicle operation.
- Inspect regularly for corrosion, stretching, or damage.
FAQ
Why is an M22 × 2.5 fine-thread bolt used for wheel mounting?
Fine threads create higher clamping force and better vibration resistance, ensuring safer wheel retention.
When should wheel mounting bolts be replaced?
Replace when threads are worn, stretched, corroded, or after repeated heavy-torque cycles.
